E8 in the Beko B3WFU48215WW ES manual indicates that the appliance may not be taking in water. Check the water supply, hose and door closure according to the guidance for that model.
Water supply and door closure
The manufacturer's documentation, in its table of warnings, recommends checking the taps, water supply interruptions, a kinked hose and the door closure. Note whether the appliance does not fill at all, fills slowly, or takes in water that subsequently leaks out.
With the machine stopped, check that no clothing is preventing the door from closing. Do not infer a solenoid valve fault from the absence of visible water; the code does not identify a part on its own.
Why the pump filter is also mentioned
The table for this model includes cleaning it as part of the E8 troubleshooting steps. Only do this by following the manual's procedure, with the appliance safely disconnected, the water cold and the water drained in a controlled way before removing the cap. This check should not be applied to all Beko series.
After correcting the conditions you can access, try again as instructed. If the fault continues, request assistance. Note whether E8 appears during the cycle or was found in the stored information; an earlier record does not necessarily describe the current state.
Keep your observation about the water alongside the code: not filling and losing water while filling are different situations.
View all articles in Beko washing machine error codes and alerts
