E8 in the Beko B3WFU48215WW ES manual indicates that the appliance may not be taking in water. Check the water supply, hose and door closure as specified for this model.
Water supply and door closure
The manufacturer’s documentation, in its warning-code table, recommends checking the taps, water supply interruptions, a kinked hose and the door closure. Note whether the appliance does not fill at all, fills slowly, or takes in water that then leaks out.
With the machine stopped, check that no clothing is preventing the door from closing. Do not infer a solenoid valve fault just because no water is visible; the code alone does not identify a specific part.
Why the pump filter is mentioned too
The table for this model includes cleaning it as part of the E8 troubleshooting steps. Follow the procedure in the manual only, ensuring the machine is safely disconnected, the water is cool and the water is drained in a controlled way before removing the cap. Do not apply this check to every Beko series.
After correcting the conditions you can safely access, retry as instructed. If the fault continues, request service. Note whether E8 appears during the cycle or was found in the error history; an earlier record does not necessarily describe the current state.
Keep your observation about the water with the code: not filling and losing water while filling are different situations.
