Protecting your washer during freezing weather and winter storage

If the washer may be exposed to freezing temperatures, check its environmental limits and storage procedure. Emptying the visible drum does not guarantee that all the water has been drained from the system.

Check the conditions at the location

A seasonal home, garage and recreational vehicle can have different temperatures from the occupied area of a home. Check where the washer, its hoses and connections will be, and whether the space meets the permitted environmental range.

The most straightforward option is a location that meets those conditions. If that cannot be guaranteed, the manual should indicate whether a winterizing procedure is available. Whirlpool documents a procedure for certain front-loading washers because water may remain in the hoses; this does not authorize using its products or steps with another washer.

What the model-specific procedure should cover

  • How to shut off the water supply and drain the connections without spilling water onto electrical components.
  • Which drains or filters the owner can open and how to collect any trapped water.
  • Whether a winterizing product is permitted and, if so, which one, where to use it and what preparation is required afterwards.
  • Which parts need to be put back in place and how to protect the appliance during storage.

Do not add automotive antifreeze or substitute a different product for an authorized formulation. Do not improvise by applying direct heat, using boiling water or running a wash cycle to thaw the system. If you cannot find the instructions, ask the manufacturer for the procedure using the model number.

Before putting it back into service

Check that the temperature of the entire washer is within its limits and that there is no visible ice or damage. Follow the manual’s instructions for putting it back into service, including removing any preservative if its use was authorized. If a leak occurs when you turn the water back on, safely shut off the supply and stop the check.

To choose a protected location, see location and environmental conditions. If the washer also needs to be transported, confirm separately what transport protection is required.

Prepare the washer for storage before freezing weather arrives. If it has already frozen, check with a service technician about how to inspect it before testing it.

View all articles in Preventive maintenance: tasks and frequency based on use