In a washer-dryer, clean the air path only through the designated access points. Check the cleaning method for each filter: mesh, foam and a heat exchanger may not all be suitable for the same treatment.
Air filter and drain filter
The first traps lint from the drying airflow; the second is part of the water drainage system. Check the manual to identify a filter warning before opening a cover. For the pump, use drain cleaning.
Removing and reinstalling filters by material
- Let the cycle finish and the appliance cool down. Prepare for cleaning and disconnect the power as directed for the access point.
- Remove the approved assembly without forcing its guides. Pick off visible lint before washing.
- Separate the components only if the manual allows it. Wash parts with water only if they are suitable for it, and follow their drying requirements.
- Check the mesh and foam for tears or deformation. Do not modify the filter or add layers.
- Reinstall each component in its seat before using the drying function again.
Drying requirements are not universal: GE allows a specific UltraFast Combo foam filter to be reinstalled while damp, while its wet-cleaning instructions for the mesh include drying it. This distinction means you must identify the part and model variant; it does not mean other filters can be reinstalled wet.
Heat exchanger and housing
Clean only what the manual makes accessible. For advanced cleaning of the GE UltraFast Combo housing, the manufacturer advises avoiding damage to the fins. Do not treat this specific access point as permission to open ducts or housings on another washer-dryer.
Water-condensing washer-dryers may not have a user-removable heat exchanger. They may have a different routine for flushing out fibres. Follow its instructions even if they differ from those for a standalone dryer.
If the warning persists with the correct filters properly installed, note the message and contact support. Include this task in the washer-dryer washing maintenance.
View all articles in Which Washing Machine Components to Clean and How to Identify Them
