The water used includes the fills and rinses in the programme, as well as any adjustments made by the controls. There is no single volume that applies to all washing machines of the same type.
What affects the amount
The programme, load weight and absorbency, rinse options, selected water level (if available), and automatic adjustments all play a part. An adjustment for excess suds or an unbalanced load can also change the total. The designation HE does not replace measured data.
How to compare or measure
Use data from the same test, or record a cycle with the load and options identified. To take a household reading from the water meter, avoid other water use during the measurement and keep in mind that leaks or shared usage make it impossible to attribute the reading to the appliance. Do not open pipes or dismantle meters.
Litres per kilogram = litres per cycle ÷ dry load weight. As an illustrative example, 48 litres for 6 kg works out to 8 L/kg; the same 48 litres for 3 kg works out to 16 L/kg. This does not mean that every programme uses the same amount of water with a half load.
If the figure is in gallons, identify which system is used: one US gallon is approximately 3.785 litres, and one imperial gallon is 4.546 litres. Regional labels may use different comparison bases.
Cost and scope of the figure
Convert litres to cubic metres by dividing by 1,000, then apply the applicable local variable water supply and wastewater rates. Hypothetical example: 50 litres and a combined rate of 3 monetary units/m³ add up to 0.15 monetary units, excluding fixed charges.
Some washer-dryers use extra water during drying. A sudden increase may also need diagnosis; it should not be explained away as a result of normal adjustments alone or addressed through improvised reuse.
Compare total water use for the same washing needs, with the result and dry load weight recorded.
View all articles in Washing machine efficiency: electricity, water and sustainability
