The washer door won’t open when the cycle ends

If the door is still locked, confirm that the cycle has finished and that there’s no water left or temperature condition preventing it from opening. Don’t pull the handle to override a safety lock.

Check the status before trying to open the door

  1. Check the panel: cycle complete doesn’t always mean paused or interrupted. Note any message.
  2. Check whether any water is visible. If draining fails, follow the safe draining steps before considering opening the door.
  3. Check the wait time and cooling conditions for your model. Don’t use a wait time from another brand.
  4. Check whether the manual distinguishes between a control lock and a door lock. Cancelling or restarting doesn’t guarantee the door will open right away.

If there’s an emergency release

Use it only with the power disconnected, all movement stopped, and the water and temperature conditions specified by the manufacturer met. Don’t mistake a visible cable or tab for an emergency release.

If the manual doesn’t provide a user-accessible method, the handle is broken, or you can’t confirm that opening the door is safe, request assistance to retrieve the load.

Broken handle or lock that won’t release

A handle that offers no resistance may not be transferring movement, while a lock may be keeping the door locked. These are different possibilities that require checking the door mechanism and the safety lock. Don’t use levers against the glass or ropes around the door seal.

Once you’ve retrieved the clothes, don’t use a damaged lock again until it has been repaired and its function checked.

View all articles in Door, lid and safety lock problems