Water flows from the wash tub to the spin tub

Water entering the spin tub may be due to a designed feature, a mispositioned selector or a drain that is not flowing properly. It does not, on its own, indicate a hole between the tubs.

Watch where the water enters

Stop the water supply if the level rises uncontrollably. From the outside, without removing any guards, note whether water falls from above or reappears from below while the wash tub drains.

Some machines allow rinsing directly into the basket. Before calling it a leak, check the selector, the position of the fill hose and the selected operation in the manual.

Consider the water inlet and drain together

Haier distinguishes between water entering from above and drainage problems in its guide to water flowing between tubs. That example does not provide universal height or flow-rate values.

If this happens while the tub is draining slowly, check the drainage path on the semi-automatic washer. A shared outlet that is not draining properly should be checked before suspecting a crack connecting the two tubs.

When the machine needs to be opened

If the controls and visible connections match the manual but water still enters when it should not, request an inspection of the ducts and connections. Do not seal internal passages or cut hoses to change the flow path.

Note whether this happens only at a high flow rate or also when the machine is idle. This information can help technicians reproduce the problem under controlled conditions during an inspection.

Do not use this explanation for a single-tub automatic washer: the tub separation and selectors change the water circuit.

View all articles in Faults in semi-automatic and double-tub washing machines