E1 indicates that the Haier washer-dryer has not drained within the time allowed by its control system. This interpretation does not apply to Err1, which refers to a door issue.
The Haier Appliances table documents E1 for draining. The table specifies four minutes for this detection on the washer-dryers described; this is not a standard limit for all Haier models.
Check whether draining is completely or partially blocked
Check for visible water and inspect the outside of the drain hose. A kinked hose or a blocked household drain should be checked before you buy parts. If the water drains slowly, make a note of it: some of the water disappearing does not prove that the washer is draining properly.
Follow the user-accessible instructions for accessing and draining the filter. Do not open the filter when the water is hot or while the washer-dryer is running. If there is no accessible procedure or you cannot collect the water, request service.
If E1 persists after the permitted checks, the drain system needs diagnosis. A humming sound does not confirm that the pump is working properly and is not a reason to keep repeating cycles.
Keep the code as E1 when reporting the issue; do not add Err. This distinction ensures the issue is reviewed under the correct system.
