E2 means the Haier washer-dryer combo does not confirm that the door is locked, according to the table consulted. Err2 refers to drainage; the two codes should not be confused.
The Haier Appliances documentation distinguishes between the two messages. The table lists a 20-second locking attempt for those washer-dryer combos; do not use that time to diagnose another Haier model without its manual.
A closed door and a locked door are different states
If the door can be opened and the drum is stationary, check for laundry caught in the door seal, an overloaded drum and visible damage to the latch. Close the door without slamming it. If the panel still does not confirm that the door is locked, do not hold the door shut to try to authorize a start.
If there is water or heat inside, respect the door lock and do not pull the handle. Cutting the power does not necessarily unlock the door.
If the area around the door is clear and E2 returns, arrange to have the locking system inspected. The display does not indicate which component to replace, nor does it authorize bypassing the lock.
Note whether E2 appears before filling or after an interruption; this can help the service technician pinpoint the lock check.
