F9 E1 and F09 E01 are associated with drainage on the documented Brastemp BNF15 front-load washer. The full code points to water removal, but does not mean the pump must be replaced.
This association appears in the BNF15ASANA manual. Don’t interpret F9 on its own as the same fault on every Brastemp model.
Check for water and inspect the drain path
Check whether water remains in the drum and whether the external hose is crushed, kinked or incorrectly connected. The manual specifies particular measurements for positioning and inserting the hose into the drain; don’t replace them with a generic height.
Note whether some water drains, whether you can hear the pump and whether there was excessive suds. The sound does not confirm that enough water is flowing, and a failure to drain does not by itself distinguish between a blockage and an internal fault.
See hose installation and the washer won’t drain for more checks. Don’t open filters or panels that the manual does not identify as user-accessible, especially if water is trapped inside or is hot. If the issue persists after the permitted checks, request a diagnosis.
Provide both parts of the code and explain how much water remained; don’t request a pump before checking the drain path.
