F5 E2 Error on a Brastemp Front-Load Washer: Door Lock

F5 E2 and F05 E02 indicate that the Brastemp BNF15 front-load washer does not confirm the door lock. They should not be generalized to any F5 error or applied to a top-load lid.

The definition is documented in the BNF15ASANA manual. Start by checking the visible door closure, not by replacing the lock.

Check for anything preventing the door from closing properly

Cancel or pause the cycle as directed in the manual, then wait for the drum to stop and the door to unlock. Move any protruding laundry out of the way and check whether the load is pressing against the door from inside. Look for damage to the latch, and close the door without slamming it or holding it under pressure.

If there is already water in the washer or it is still hot, do not pull the handle to repeat the inspection. A door that is shut does not guarantee that the control has received confirmation that it is locked.

If the alert returns when nothing is obstructing the door, have the locking system inspected. Door lock inspection and door opening and closing problems cover related situations. Do not bypass electrical connections or use internal release mechanisms from another platform.

Note whether F5 E2 appears before the washer fills or when resuming an interrupted cycle; this can help pinpoint the missing confirmation.

View all articles in Brastemp washer codes and alerts