F9 E1 and F09 E01 are associated with drainage in the documented Brastemp BNF15 front-load washing machine. The complete code points to water evacuation, but does not necessarily mean the pump needs replacing.
This association appears in the BNF15ASANA manual. Do not assume that an F9 code on any Brastemp indicates the same fault.
Check the water and drainage path
Check whether water remains in the drum and whether the external hose is crushed, kinked or connected incorrectly. The manual specifies measurements for positioning the hose and inserting it into the drain; do not replace these with a generic height.
Note whether the water drains partially, whether you can hear the pump and whether there was excessive foam. The sound does not confirm that the water is flowing sufficiently, and failure to drain alone cannot distinguish between a blockage and an internal fault.
See hose installation and a washing machine that will not drain for further checks. Do not open filters or panels that the manual does not identify as user-accessible, especially if water is trapped or hot. If the issue persists after the checks permitted by the manual, request a diagnosis.
Share both parts of the code sequence and explain how much water remained; do not request a pump without first checking the drain outlet.
View all articles in Brastemp washing machine codes and alerts
