F9 E1 error on a Brastemp front loader: drainage

F9 E1 and F09 E01 are associated with drainage on the documented BNF15 Brastemp front loader. The full code points to drainage, but does not mean the pump must be replaced.

The association appears in the BNF15ASANA manual. Don’t assume F9 on just any Brastemp means the same fault.

Check the water and drainage path

Check whether water remains in the drum and whether the external hose is crushed, kinked or connected incorrectly. The manual specifies particular measurements for positioning and insertion into the drain; don’t substitute a generic height.

Note whether some water drains, whether you can hear the pump and whether there was excessive suds. The sound does not confirm sufficient flow, and failure to drain does not, by itself, distinguish a blockage from an internal fault.

See how to install the hose and what to do when the washing machine won’t drain for further checks. Don’t open filters or panels that the manual does not identify as user-accessible, especially if water is trapped inside or hot. If the problem persists after the permitted checks, request a diagnosis.

Provide both parts of the sequence and explain how much water remained; don’t request a pump without first checking the outlet.

View all articles in Brastemp washer codes and alerts