If the water level rises abnormally or threatens to overflow, stop using the machine and shut off the water supply from a safe location. The first priority is to stop the water from coming in, not to restart the cycle.
Contain the water without exposing yourself to wet connections
If you can do so safely, turn off the water supply taps. Disconnect the power from a dry location; don’t reach for a plug surrounded by water. Don’t force the door open or remove the filter cap while the drum is full.
Describe what you’ve already observed: whether the water level kept rising after you turned the machine off, whether suds appeared, and which stage it started in. Don’t leave the water running to recreate a flood.
What each observation means
- Water entering while the machine is off: distinguish between a valve that isn’t closing and external backflow. See filling with the machine off.
- Water building up while the controls are calling for water: the level-sensing circuit may be involved, as well as the water inlet control.
- Suds covering the window: this doesn’t necessarily mean there’s an equal volume of water. The detergent and cycle should be included in your notes.
The normal water level depends on the machine’s design, cycle, and load. An additional fill that’s part of the cycle doesn’t necessarily indicate overfilling either; the concern is a rise that can’t be controlled or exceeds documented limits.
The technician should check both whether the solenoid valve closes properly and the system signals. Adjusting pressure-switch screws or blowing into electronic sensors can alter or damage components.
If you can’t stop the water supply or water reaches electrical equipment, stay away from the area and contact the appropriate emergency service for the situation.
View all articles in Problems with filling, water level and draining
