E1 indicates a water supply issue in the Japanese AQUA washing machine documentation consulted. Confirm your model before applying that code to an AQUA machine in another market.
This association appears in the official AQUA FAQ. Start by checking that water is reaching the washing machine.
Check the water supply and inlet
Check the appliance’s tap and whether there has been a water supply interruption. Check whether the hose is kinked. If the area has experienced freezing temperatures, consult your model’s procedure; don’t force a frozen hose or apply concentrated heat.
Cleaning the inlet mesh depends on the instructions in your manual. Before disconnecting an approved connection, shut off the water and disconnect the power supply. Reinstall the mesh and check for leaks as instructed; leaving it out permanently is not a solution to low water flow.
If E1 reappears despite a proper external water supply, note whether no water enters or the fill is weak, and request service. The code alone does not prove that a valve or sensor has failed.
Indicate whether you use a municipal water supply or a different setup; its conditions should be checked against what your manual allows.
View all articles in AQUA washing machine error codes and alerts
