E10, E11 or C1 on AEG machines, and a beep or flashing light on compatible models, indicate problems with the water circuit, usually during filling.
No water, slow filling or water loss during filling
The manufacturer’s documentation groups water supply and flow problems together. First, check the tap and whether water is available in your home. Check the accessible hose for kinks or crushing.
If water enters but does not stay in the machine, compare the drain position with the PNC-specific manual. A connection that allows siphoning cannot be fixed by increasing the detergent amount or restarting the cycle.
Filters and suds: check what you observe
Inlet screens should only be cleaned using the user procedure, after shutting off the water supply and preparing to disconnect them. Refit the seals and filters, then check for leaks. See maintaining inlet screens.
If there are suds, check the detergent type and amount: they can affect how the water circuit operates. Don’t assume every E10 is caused by detergent, or open a pump filter without checking that it relates to the symptom and the manual.
If the alert returns despite a normal water supply and correct installation, contact service and provide the PNC. Flow rates and heights should be taken from the product documentation; the code does not confirm a faulty solenoid valve.
Note whether water never enters or enters and then drains away; this difference helps guide the inspection.
View all articles in AEG washing machine error codes and warnings
