How to reduce microfibre shedding when washing clothes

To reduce fibre release, avoid unnecessary treatments and check the effectiveness and compatibility of any capture device. There is no reduction percentage that applies to all fabrics and machines.

What is being measured

Textile microfibres can come from synthetic materials or other fibres; microfibre and microplastic are not synonymous in every case. The amount released into the water depends on the fabric, wear and test conditions.

A University of Plymouth study compared several fabrics and conditions and found different results. Its figures apply to that test; they cannot be used to calculate the emissions from any ordinary household wash.

Usage choices that can be assessed

Wash clothes when they need cleaning and use a cycle that deals with the soiling while staying within the care label instructions, without adding intensive phases or extra washes out of habit. Avoiding an unnecessary wash reduces one washing operation, but that is no reason to keep clothes damp, contaminated or dirty.

Check for damage, sort clothes appropriately and avoid unnecessary friction. Don’t assume the gentlest cycle always releases fewer fibres: duration, water and movement all change at once and need to be compared.

Choosing and maintaining a compatible capture device

In a Plymouth test published in 2020, six devices produced different results under comparable loads and measurement conditions. This variation means the figure for the most effective device cannot be attributed to every bag or filter.

Before using a bag or device, look for tests that describe the fabric, load, machine and measurement method. Distinguish the percentage of fibres captured from the overall reduction in emissions, and don’t compare it with another figure obtained under different conditions.

Follow the device’s loading and cleaning instructions, and dispose of the residue using the specified method and in accordance with local regulations. Don’t wash the collected fibres down the drain when cleaning the device. An ordinary protective mesh has no proven capture effectiveness just because of how it looks.

External filter installation and environmental requirements need to be checked on a case-by-case basis; don’t add accessories to the system without the team’s approval.

View all articles in Laundry not coming out right: residue, stains and washing damage