Clothes get tangled or trapped inside covers during washing

Investigate tangles by checking long items, openings in covers, mixed sizes and load distribution. Don’t tie clothes or improvise restraints to stop them moving.

Work out how the bundle formed

Check whether smaller items went through an opening, a sheet wrapped around other items, or several straps became tangled together. Distinguish this laundry issue from a mechanical fault: a bunched-up load can affect the spin cycle without confirming that a component is faulty.

Prepare covers and long items

For sheets and covers, follow the instructions for fasteners and loading. Don’t tie knots in corners or close openings with pins or other objects. Prepare zips, drawstrings and hook-and-loop fasteners on other items to prevent snags.

Check whether the load combines items of shapes and sizes that the manual says can be washed together. Don’t squash a large item to make room for others or wrap it around the agitator.

Untangle a load during the cycle

  1. Use the approved pause function and wait for the machine to stop and open normally.
  2. Gently separate the items without pulling on a strap or seam that is under tension.
  3. Check the load limit and distribution before restarting the permitted cycle phase.
  4. If the item is too large or not suitable, remove it using the machine’s procedure rather than trying again.

When the cycle is finished, separate the load before drying it to check that every item has been cared for and no areas remain bunched up with product residue.

If the same tangle keeps happening, change how you prepare the items or the make-up of the load, without restraining the clothes.

View all articles in Laundry not coming out right: residue, stains and washing damage