To reduce fibre release, avoid unnecessary treatments and check the effectiveness and compatibility of any capture device. There is no reduction percentage that applies to all fabrics and machines.
What is being measured
A textile microfibre can come from synthetic materials or other fibres; microfibre and microplastic are not synonymous in every case. The amount released into the water depends on the fabric, wear and test conditions.
A University of Plymouth study compared several fabrics and conditions and found different results. Its figures apply to that test; they cannot be used to calculate the emissions from just any household wash.
Usage choices that can be assessed
Wash a garment when it needs cleaning and use a programme that removes its dirt while following the care label, without adding intensive phases or extra cycles out of habit. Avoiding an unnecessary wash reduces one operation, but does not justify keeping clothes damp, contaminated or dirty.
Check for damage, sort clothes appropriately and avoid unnecessary friction. Do not assume that the gentlest programme always releases fewer fibres: duration, water and movement all change together and need to be compared.
Choosing and maintaining a compatible capture device
In a Plymouth test published in 2020, six devices produced different results under comparable loads and measurement conditions. This variation means that the figure for the most effective device cannot be attributed to every bag or filter.
Before using a bag or device, look for tests that describe the fabric, load, machine and measurement method. Distinguish the percentage of fibres captured from the overall reduction in emissions, and do not compare it with another figure obtained under different conditions.
Follow the device's loading and cleaning instructions, and dispose of the residue using the specified method in accordance with local regulations. Do not wash the collected fibres down the drain when cleaning the device. An ordinary protective mesh is not proven to capture fibres just because of how it looks.
External filter installation and environmental requirements need to be checked specifically; do not add accessories to the circuit without the team's authorisation.
View all articles in Clothes don’t come out right: laundry residues, stains and damage
