How to reduce microfibre shedding when washing clothes

To reduce fibre release, avoid unnecessary treatments and check the effectiveness and compatibility of any capture device. There is no reduction percentage that applies to all fabrics and machines.

What is being measured

A textile microfibre can come from synthetic materials or other fibres; microfibre and microplastic are not synonymous in every case. The amount released into the water depends on the fabric, wear and test conditions.

A University of Plymouth study compared several fabrics and conditions and found different results. Its figures apply to that test; they cannot be used to calculate the emissions from just any household load of laundry.

Use choices that can be evaluated

Wash a garment when it needs cleaning, and use a cycle that gets it clean while staying within the care label’s instructions. Don’t add intensive stages or repeat cycles out of habit. Avoiding an unnecessary wash reduces one laundry cycle, but that doesn’t justify keeping clothes damp, contaminated or dirty.

Check for damage, sort laundry appropriately and avoid unnecessary friction. Don’t assume the most delicate cycle always releases fewer fibres: cycle duration, water and movement all change at once and need to be compared.

Choosing and maintaining a compatible capture device

In a Plymouth test published in 2020, six devices produced different results under comparable load and measurement conditions. This variation means you can’t attribute the most effective device’s figure to every bag or filter.

Before using a bag or device, look for tests that describe the fabric, load, machine and measurement method. Distinguish the percentage of fibres captured from the total reduction in emissions, and don’t compare it with another figure obtained under different conditions.

Follow the device’s loading and cleaning instructions, and dispose of the residue as directed and in accordance with local regulations. Don’t rinse captured fibres down the drain when cleaning the device. An ordinary protective mesh has no proven capture effectiveness based on its appearance alone.

External filter installation and environmental requirements need to be checked specifically; don’t add accessories to the system without authorization from the team.

View all articles in Clothes don’t come out right: residue, stains and laundry damage