Find out the hardness from information about your water supply or by testing the water entering the machine. Record the value and unit: foam, taste and clarity are not precise measurements.
Get a figure that represents your installation
If you receive water from a mains supply, check the report or contact the supplier. A regional map is no substitute for information about the supply to your home. If you use a bore, have multiple supplies or treat your water, you may need to test the relevant point.
When using a home test, follow the manufacturer's instructions for sampling, reading the result and using the scale. Range-based strips provide an estimate; don't make up decimal places between colours. If the result will inform a water-treatment decision, confirm it using a suitably precise method.
Compare units before using a table
Hardness is usually expressed as calcium carbonate equivalent. The Maryland Geological Survey lists these common conversions:
| Value | Equivalent for this expression of hardness |
|---|---|
| 1 mg/L as CaCO3 | Approximately 1 ppm in water |
| 1 gpg | Approximately 17.1 mg/L as CaCO3 |
For example, 10 gpg is approximately 171 mg/L as CaCO3. Don't compare that 10 directly with a table in mg/L. If the report uses French degrees, German degrees or another scale, check the conversion in the supply or test documentation before classifying the value.
How to use the result
Check the detergent dosing chart and the appliance's maintenance requirements. The limits for soft or hard water may differ between product labels; use the scale in the document you're referring to.
The result helps you assess water softening and preventing deposits, but it doesn't prescribe a fixed amount of additive. If the water is pre-treated, use the result from the treated water and check that the treatment is maintained.
What hardness doesn't measure
Hardness is not a measure of sand, iron, total salinity or the water's safety. If the supply is brown or has an unusual smell, contact your supplier. When using bore, rain or tank water, also check the conditions of that source; a hardness strip won't resolve the issue.
Record the date, sample source, method, value and unit. If the supply or treatment changes, confirm the result again before keeping the same settings.
View all articles in Limescale and water quality: caring for your washing machine
