Find out the water hardness from your water supplier’s information or by testing the water that enters the machine. Record the value and unit: foam, taste and clarity are not precise measurements.
Get a reading that represents your water supply
If your water comes from a municipal supply, check the report or contact the supplier. A regional map is no substitute for information about the supply to your home. If you use a well, have multiple sources of water or treat your water, you may need to measure it at the relevant point.
When using a home test, follow the manufacturer’s instructions for sampling, reading the result and interpreting the scale. Range-based test strips provide an estimate; don’t make up decimal places between colours. If the result will inform a water-treatment decision, confirm it using a suitably precise method.
Compare units before using a chart
Hardness is usually expressed as calcium carbonate equivalent. The Maryland Geological Survey lists these common equivalents:
| Reading | Equivalent for this expression of hardness |
|---|---|
| 1 mg/L as CaCO3 | Approximately 1 ppm in water |
| 1 gpg | Approximately 17.1 mg/L as CaCO3 |
For example, 10 gpg is approximately equivalent to 171 mg/L as CaCO3. Don’t compare that 10 directly with a chart in mg/L. If the report uses French degrees, German degrees or another scale, confirm the conversion in the water-supply or test documentation before classifying the value.
How to use the result
Check the detergent dosage chart and the appliance’s maintenance requirements. The limits for soft or hard water may differ between product labels; use the scale in the document you’re consulting.
The reading can help you assess water softening and scale prevention, but it doesn’t prescribe a fixed amount of additive. If the water has been treated, use the result at the treatment system’s outlet and check that the system is maintained.
What water hardness doesn’t measure
It isn’t a measure of sand, iron, total salinity or the health safety of the water. If your water comes out brown or has an unusual smell, contact your supplier. When using well, rain or tank water, also check the conditions of that source; a hardness test strip won’t address the issue.
Record the date, sample source, method, value and unit. If your water supply or treatment changes, confirm the reading again before keeping the same settings.
View all articles in Limescale and water quality: caring for your washing machine
