Find out the hardness from water-supply information or by testing the water entering the machine. Record the value and unit: foam, taste and clarity are not precise measurements.
Get a reading that represents your water supply
If your water comes from a mains supply, check the report or contact the supplier. A regional map is no substitute for information about the supply to your home. If you use a well, have several water sources or treat your water, you may need to test water at the relevant point.
For a home test, follow the manufacturer's instructions for sampling, reading the result and using the scale. Test strips with ranges provide an estimate; do not make up decimal places between colours. If the result will inform a treatment decision, confirm it using a suitably precise method.
Check the units before using a table
Hardness is usually expressed as calcium carbonate equivalent. The Maryland Geological Survey lists these common conversions:
| Reading | Equivalent for this expression of hardness |
|---|---|
| 1 mg/L as CaCO3 | Approximately 1 ppm in water |
| 1 gpg | Approximately 17.1 mg/L as CaCO3 |
For example, 10 gpg is approximately 171 mg/L as CaCO3. Do not compare that 10 directly with a table in mg/L. If the report uses French degrees, German degrees or another scale, check the conversion in the supply or test documentation before classifying the value.
How to use the result
Refer to the detergent dosing table and the appliance's maintenance instructions. The limits for soft or hard water may differ between product labels; use the scale in the document you are consulting.
The reading helps you assess water softening and preventing scale deposits, but it does not prescribe a fixed amount of additive. If the water has been treated beforehand, use the reading from the outlet and check that the treatment system is maintained.
What water hardness does not measure
It is not a measure of sand, iron, total salinity or the water's safety for drinking. If the supply water is brown or has an unusual smell, contact the supplier. When using well, rain or tank water, check the conditions of that source as well; a hardness test strip will not resolve the issue.
Record the date, sample source, method, value and unit. If the supply or treatment changes, confirm the reading again before keeping the same settings.
View all articles in Limescale and water quality: washing machine care
