Auto-dosing dispenses detergent from a reservoir or cartridge. The amount depends on the available settings and sensors; automatic dosing does not mean the machine directly measures all the dirt.
From stored detergent to the wash drum
The system stores detergent in a refillable reservoir or uses a purpose-designed cartridge. A pump or dosing mechanism feeds an amount into the path to the wash. The automatic system described by LG SIGNATURE is an example of storage for several loads; other product ranges use different circuits and settings.
What information can it use?
- Base dose: the starting amount set for the product or reference load.
- Concentration: links the dispensed volume to the effective amount of detergent.
- Water hardness: may need to be adjusted manually or be included in the documented settings.
- Load and sensors: can be used to adjust the amount if the cycle and appliance support this function.
A machine may estimate the load weight without measuring turbidity, or dispense a base dose without recognising the fabric. Check what each sensor estimates before assuming the reservoir has capabilities that belong to the control system.
Compatibility and manual alternatives
The detergent must be suitable for the reservoir, its permitted viscosity and the manufacturer's conditions. Do not mix different liquids or reuse a sealed cartridge without instructions. Changing the concentration without adjusting the reference setting can alter the dose even if the mechanism is working correctly.
Some cycles let you turn off dosing or use a manual compartment; others have restrictions. The initial setup can help you find the available settings. Cleaning or a persistent failure to dispense requires following the relevant procedures.
Check what determines the dose on your model before deciding whether the result is due to the setting, the detergent or the dispensing mechanism.
View all articles in Washing technologies: motors, sensors and automation
