Automatic dosing dispenses product through a reservoir or cartridge system. The amount depends on the available settings and sensors; automatic dosing does not mean directly measuring all the dirt.
From stored product to the drum
The system stores detergent in a refillable reservoir or uses a designated cartridge. A pump or dosing mechanism adds an amount to the path leading to the wash. The automatic system described by LG SIGNATURE is an example of storage for multiple loads; other product lines use different circuits and settings.
What information it can use
- Base dose: the starting point set for the product or reference load.
- Concentration: relates the dispensed volume to the effective amount of product.
- Water hardness: may require manual adjustment or be part of the documented setup.
- Load and sensors: can allow the amount to be adjusted if the program and appliance have that feature.
A machine may estimate weight without measuring turbidity, or dispense from a base dose without identifying the fabric. Check what each sensor estimates before attributing capabilities of the controls to the reservoir.
Compatibility and manual alternatives
The product must be suitable for the reservoir, its accepted viscosity and the manufacturer's conditions. Do not mix different liquids or reuse a sealed cartridge without instructions. Changing the concentration without adjusting the reference can alter the dose, even when the mechanism is working properly.
Some cycles allow you to turn off dosing or use a manual compartment; others have restrictions. The initial setup helps you find the available settings. Cleaning or a persistent failure to dispense requires its own specific procedures.
Identify what determines the dose in your model before deciding whether the result is due to the setting, the product or the dispensing mechanism.
View all articles in Laundry technologies: motors, sensors and automation
