How to measure a washing machine and the space where it will be installed

Measure the space the washing machine needs when closed and the space it takes up when in use. The space must allow for connections, opening and servicing, as well as passage along the access route.

Take measurements using the manufacturer's diagram

  1. Note the width, height and depth, and identify what each measurement includes: cabinet, door, controls and protrusions.
  2. Mark the clearance needed for the door or lid when open, and the space required to access the drum without obstructions.
  3. Allow the clearances specified for hoses, the power cord, ventilation and space from nearby furniture.
  4. Check that the detergent drawer can open and that you can access the filter or available maintenance point.
  5. Measure the doorways, hallways, lift and turns the appliance must pass through to get in or out.

A stated commercial depth may refer to the cabinet only. Pushing the machine back until it fits can kink a hose or leave no room for a connection.

What to check in the actual space

The space may vary in width between the front and back, or skirting boards and pipes may reduce the usable area. Measure at several points and use the tightest measurement along with the installation clearances. Don't assume the door is reversible.

To convert dimensions, 1 inch is exactly 2.54 cm. Keep enough precision when converting, and don't round in a way that removes a necessary clearance.

Installations with additional requirements

An integrated cabinet adds panels and hinges; stacking adds height and servicing requirements for the combined unit. Also plan for moving: the final space alone does not resolve access.

Check the actual measurements of the access route and space against the complete installation diagram, not just a single width measurement.

View all articles in Washing machine capacity and dimensions: how to interpret the figures