E10 indicates a filling problem during washing on the Midea L11 platform. Start with the external water supply; the technical table does not authorise testing valves or control boards at home.
The association is confirmed in the official L11 technical manual. Operating and maintenance steps should come from the manual for the installed model.
Check what could be preventing water from entering
Check that the tap is open and that water is being supplied. Check whether the hose has become kinked when the washing machine was pushed into position. If water enters but the level does not stabilise, also note whether it seems to be draining away; do not add water by hand to get past the warning.
Disconnecting hoses or cleaning filters requires following the user procedure, with the water turned off and the power supply isolated beforehand. Do not copy resistance measurements or connector tests from the technical manual.
If E10 reappears when the external conditions are correct, request a diagnosis of the filling system and its detection. The L11 alarm delay does not apply as a limit to other Midea models.
Provide the code, model and an observation of the incoming water; that information is more useful than ordering a solenoid valve based on the message.
View all articles in Midea washing machine error codes and warnings
