Midea washing machine error codes and warnings

Midea washing machine error codes and warnings

The Midea codes in this index are based on the L11 front-loading platform. The technical reference can be used to verify their meanings; user actions should follow the manual for your model.

A documented platform does not represent the whole brand

The L11 technical manual hosted by Midea France verifies the alarms covered here. A Midea washer based on another platform, or an appliance from another brand in the group, is not covered simply because it shares letters, parts or appearance.

Distinguish inlet, level, outlet and door

E10 points to filling during the wash. E12 indicates that an overfill has been detected; address a rising water level or leak before restarting. E21 points to the drain time being exceeded. E30 indicates that the door has not locked.

Note the code and where it occurred in the cycle before clearing the display. Whether water is present and whether the door appears closed can help describe the issue, but does not prove which part is faulty.

Use the right manual for each action

The service document contains test modes, measurements and disassembly procedures intended for technical diagnosis. They are not for household maintenance. To remove a filter, disconnect a hose or resume a cycle, consult the user manual for your model. If you cannot find it, ask support to confirm the instructions before opening any access panels.

Frequently Asked Questions

Do E10 and E21 mean the same thing?

No. On L11, E10 relates to filling and E21 to draining taking longer than expected. Both alarms involve water, but point to different circuits.

Can Midea codes be applied to manufacturers outside the group?

Not on the basis of corporate ownership or an apparently similar platform. Each brand and model needs its own documentation to confirm the meaning and permitted actions.

What can I check without opening the washing machine?

You can check the external hoses, water supply, any visible water and obstructions around the door closure. Only remove parts if the user manual authorises it; technical test modes are outside the scope of these checks.

What information do I need to confirm the platform?

The full model number from the rating plate, its user manual and, if needed, confirmation from support that it matches the platform mentioned. The E10 code alone does not identify L11.

The match with L11 should be confirmed using the appliance documentation; do not choose a table based on a similar-looking control panel.