E10 indicates a filling problem during washing on the Midea L11 platform. Start with the external water supply; the technical table does not authorise testing valves or control boards at home.
The association is confirmed in the official L11 technical manual. Operating and maintenance steps should come from the manual for the installed model.
Check what could be preventing water from entering
Make sure the tap is open and that there is a water supply. Check whether the hose has become kinked when pushing the washing machine into position. If water enters but the level does not stabilise, also note whether water seems to be draining out; do not add water by hand to get past the warning.
Disconnecting hoses or cleaning mesh filters requires following the user procedure, first turning off the water and isolating the power supply. Do not copy resistance measurements or connector tests from the technical manual.
If E10 reappears when the external conditions are correct, request a diagnosis of the filling system and its detection. The L11 alarm time limit does not apply to other Midea models.
Provide the error code, model reference and an observation about the incoming water; this information is more useful than ordering a solenoid valve based on the message.
View all articles in Midea washing machine error codes and alerts
