E10 indicates a filling problem during the wash programme on the Midea L11 platform. Start with the external water supply; the technical table does not authorise testing valves or circuit boards at home.
The association is confirmed in the official L11 technical manual. Operating and maintenance steps should come from the manual for the installed model.
Check what could be preventing water from entering
Check that the tap is open and that there is a water supply. See if the hose has become kinked when you pushed the washing machine into position. If water enters but the level does not stabilise, also note whether it seems to be draining away; do not add water by hand to override the warning.
Disconnecting hoses or cleaning mesh filters requires following the user instructions, turning off the water first and isolating the power supply. Do not use resistance measurements or connector tests from the technical manual.
If E10 reappears when the external conditions are correct, request a diagnosis of the filling system and its detection. The L11 alarm time limit does not apply to other Midea models.
Provide the code, model reference and an observation of the incoming water; this information is more useful than requesting a solenoid valve based on the message.
View all articles in Midea washing machine error codes and warnings
