E10 Error on Midea Washing Machines: Water Inlet Problem on L11

E10 indicates a filling problem during the wash cycle on the Midea L11 platform. Start with the external water supply; the technical table does not authorize testing valves or control boards at home.

The association is confirmed in the official L11 technical manual. Operating and maintenance steps should come from the manual for the installed model.

Check what could be preventing water from entering

Make sure the tap is open and that water is flowing. Check whether the hose was kinked when the washing machine was pushed into position. If water enters but the level does not stabilize, also note whether it seems to be draining out; do not add water by hand to get past the warning.

Disconnecting hoses or cleaning screens requires following the user instructions, with the water turned off and the power supply isolated first. Do not copy resistance measurements or connector tests from the technical manual.

If E10 reappears when the external conditions are correct, request a diagnosis of the filling system and its detection. The L11 alarm time limit does not apply to other Midea models.

Provide the code, model reference, and observations about the incoming water; that information is more useful than ordering a solenoid valve based on the message.

View all articles in Midea washer error codes and warnings