E12 error in Midea washing machines: overfill detection in L11

E12 indicates that overfilling has been detected in the Midea L11. If the water level is rising or water is escaping, stop the water supply and avoid triggering another alarm by starting a new cycle.

The L11 technical manual checks for an excessive water level. The code alone does not show whether the fault is with the valve, water-level reading or electronics.

Record what happened without filling the machine again

Note whether water continued to enter after you stopped the programme and whether any water escaped from the appliance. Turn off the tap if you can do so safely. Do not turn it back on to see if the problem happens again.

If water reaches electrical connections, keep away and get help to isolate the power supply from a dry, safe location. Do not force the door open or tilt the machine to remove water from its base.

Even if the visible water level has dropped, keep a record of the E12 error and arrange an inspection if it reappears. Do not enter the service mode described in the technical document or blow into pressure tubes: interfering with the detection system can affect the fill safeguards.

A service technician should check the cause of the overfilling and how it is detected; clearing the alert does not prove that the circuit is working correctly.

View all articles in Midea washing machine error codes and warnings