IE, E02 and E10 indicate insufficient filling in the documented LG front-loaders. Water intake, unintended water loss and level detection require different checks.
LG groups these signals in its front-loader documentation. The alert indicates that the expected water level has not been reached; it does not, by itself, identify the inlet valve.
Follow the path of the water
- Check whether the water supply has been cut off and whether the washing machine tap is open. Having water from a tap elsewhere in the home does not guarantee that the machine's own tap is open.
- Check whether the inlet hose has been kinked after moving the appliance. Do not disconnect a fitting while the tap is open.
- Refer to the inlet filter section of the manual. If it says they can be cleaned, turn off the water and disconnect the power before dismantling the specified connection.
- If water enters but seems to disappear, check the inlet and drain installation: an installation that encourages siphoning can prevent the water level from being reached.
If water remains in the drum and detection is still abnormal, do not add water by hand to fool the sensor. PE refers to water-level detection and requires its own interpretation if that is the code displayed.
If the water supply is available and the external hoses are unobstructed, a recurring IE error requires the filling circuit to be checked; do not keep testing it with repeated start attempts.
View all articles in LG washing machine error codes and messages
