IE, E02 and E10 indicate insufficient filling on the documented LG front-loaders. The water supply, unintended drainage and water-level reading require different checks.
LG groups these signals in its front-loader documentation. The warning means that the expected water level has not been reached; it does not by itself identify the solenoid valve.
Follow the water’s path
- Check whether the water supply has been cut off and whether the washing machine’s tap is open. A tap elsewhere in the home running water does not guarantee that the machine’s own tap is open.
- Check whether the inlet hose was kinked after the appliance was moved. Do not disconnect a connection while the tap is open.
- See the manual’s section on inlet filters. If it says they can be cleaned, turn off the water and disconnect the power supply before dismantling the specified connection.
- If water enters but seems to disappear, check the water inlet and drainage installation: an installation that encourages siphoning can prevent the water level from being reached.
If water remains in the drum and detection is still abnormal, do not add water by hand to fool the sensor. PE refers to the water-level reading and needs to be interpreted separately if that is the code displayed.
If the water supply is available and the external hoses are unobstructed, a recurring IE error calls for the filling circuit to be checked; do not keep testing it by starting the machine repeatedly.
View all articles in LG washing machine error codes and alerts
