IE / E02 / E10 error in LG washing machines: insufficient filling

IE, E02 and E10 indicate insufficient filling in the documented LG front-load washing machines. Water supply, unintended drainage and level sensing require different checks.

LG groups these signals in its front-load washer documentation. The alert indicates that the expected water level has not been reached; it does not, by itself, identify the inlet valve.

Follow the water flow

  1. Check whether the water supply is interrupted and whether the washing machine’s tap is open. Water flowing from a tap in your home does not guarantee that the specific tap supplying the machine is open.
  2. Check whether the inlet hose was kinked after moving the appliance. Do not disconnect a joint while the tap is open.
  3. Refer to the inlet filter section of the manual. If it says they can be cleaned, turn off the water and disconnect the power supply before removing the specified connection.
  4. If water enters but seems to disappear, check the water inlet and drainage installation: an installation that encourages siphoning can prevent the water level from being reached.

If water remains in the drum and level detection is still abnormal, do not add water by hand to fool the sensor. PE refers to level sensing and needs to be interpreted separately if that is the code displayed.

If the water supply is available and the external hoses are unobstructed, a recurring IE error requires the filling circuit to be checked; do not keep testing by repeatedly restarting the machine.

View all articles in LG washing machine error codes and alerts