IE, E02 and E10 indicate insufficient filling on the documented LG front-load washers. The water supply, unintended drainage and level reading require different checks.
LG groups these indicators in its front-load washer documentation. The message means the expected level has not been reached; it does not, on its own, identify the solenoid valve.
Follow the path of the water
- Check whether the water supply is interrupted and whether the washing machine’s tap is open. Water from a household tap does not guarantee that the machine’s specific tap is open.
- Check whether the inlet hose was kinked after moving the appliance. Do not disconnect a fitting while the tap is open.
- Consult the manual’s section on inlet filters. If it says they can be cleaned, turn off the water and disconnect the power before removing the specified connection.
- If water enters but seems to disappear, check the water supply and drain installation: an installation that encourages siphoning can prevent the water from reaching the required level.
If water remains in the drum and the level detection is still abnormal, do not add water by hand to fool the sensor. PE refers to the level reading and requires its own interpretation if that is the code displayed.
If the water supply is available and the external hoses are unobstructed, a recurring IE error requires inspection of the fill circuit; do not keep testing by restarting the machine repeatedly.
