Err2 indicates a drainage problem on the Haier washer-dryers listed in the table consulted. E2, without Err, relates to the door lock and should be interpreted separately.
The Haier Appliances documentation points to the drain and filter as possible causes of Err2. Access the components as described in the manual for your model.
If water is trapped inside, check the drain hose first
Check whether the external hose is kinked or pushed too far into the drain. An incorrect connection can make draining difficult; adjust the installation as described in the manual, without removing any appliance fastenings by trial and error.
If the appliance has a filter that users can access, stop and unplug the washer-dryer, then let the water cool. Prepare to drain off any residual water as instructed before loosening the filter. Opening it suddenly when the drum is full can release a lot of water.
If the hose and the filter intended for user access are clear and Err2 appears again, arrange for the circuit to be checked. Hearing the pump does not prove that there is sufficient flow, and the error alone is not enough to condemn the pump or control board.
When contacting support, explain whether the appliance failed to drain at all or whether water remained after it had drained partially.
View all articles in Haier washing machine error codes and warnings
