Err2 error in Haier washing machines: the washer-dryer won’t drain

Err2 indicates a drainage issue in the Haier washer-dryers listed in the table consulted. E2, without Err, refers to a door lock issue and should be interpreted separately.

The Haier Appliances documentation points to drainage and the filter for Err2. Access should match the manual for the model installed.

If water is still inside, check the drain hose first

Check whether the external hose is kinked or inserted too far into the drain. An incorrect connection can make draining difficult; correct the installation according to the manual, without removing appliance fasteners as a trial.

If the appliance has a user-accessible filter, stop and unplug the washer-dryer, then allow the water to cool. Prepare for the residual water to drain as indicated before loosening the filter. Opening it suddenly when the drum is full can release a lot of water.

If the hose and the authorised filter are clear and Err2 appears again, request a check of the drainage circuit. Hearing the pump does not prove that the water flow is sufficient, and the alarm alone is not enough to conclude that the pump or control board is faulty.

When contacting support, explain whether the appliance did not drain at all or whether water remained after draining partially.

View all articles in Haier washing machine error codes and alerts