Candy identifies E02 as a water inlet problem on compatible washing machines. Check whether the machine does not fill, fills slowly or loses water while trying to fill.
Check the water supply and hose
The official Candy technical FAQ points to the inlet circuit for E02. Check that the tap is open and the household water supply is working. Check whether the hose is kinked, crushed or damaged without pulling the appliance out.
If the flow is low, check the conditions in the manual for your model. Do not use a pressure value from another platform or try to adjust internal inlet components.
Filters and water loss
An accessible mesh filter may need cleaning if the manual recommends it. Turn off the water before disconnecting it, then reinstall the mesh and seal; check for leaks. See cleaning inlet filters.
If water enters but drains away at the same time, check the height and positioning against the installation diagram. Do not automatically assume this behaviour means a faulty valve.
After correcting anything accessible, follow the panel's recovery steps. If E02 returns with a normal water supply, request a diagnosis and provide the model number and those observations separately.
A filling error code describes a condition; on its own, it does not identify the component responsible.
View all articles in Candy washing machine error codes and alerts
