Candy identifies E02 as a water inlet problem on compatible washing machines. Check whether the machine does not fill, fills only a little, or loses water while trying to fill.
Check the water supply and hose
The official Candy technical FAQ directs E02 to the inlet circuit. Check that the tap is open and that the household water supply is working. Check whether the hose is kinked, crushed or damaged, without pulling the appliance out.
If the flow is low, check the conditions in the model's manual. Do not use a pressure value from another platform or attempt to adjust internal inlet components.
Filters and water loss
An accessible mesh filter may need cleaning if the manual says it can be cleaned. Turn off the water before disconnecting it, then refit the filter and seal; check for leaks. See cleaning inlet filters.
If water enters but flows out through the drain at the same time, check the height and positioning against the installation diagram. Do not automatically assume this behaviour means a faulty valve.
After correcting anything accessible, follow the panel's recovery procedure. If E02 returns when the water supply is normal, request a diagnosis and provide the model number and those observations separately.
A filling code describes a condition; by itself, it does not identify the component responsible.
View all articles in Candy washing machine error codes and alerts
