Candy Error E02: water inlet problem

Candy identifies E02 as a water inlet problem on compatible washing machines. Check whether the machine does not fill, fills slowly, or loses water while trying to fill.

Check the water supply and hose

The official Candy technical FAQ directs E02 to the water inlet circuit. Check that the tap is open and that the household water supply is working. Check whether the hose is bent, crushed, or damaged without pulling the appliance out.

If the flow is low, check the conditions in the manual for your model. Do not use a pressure value from another product platform or try to adjust internal inlet components.

Filters and water loss

An accessible mesh filter may need cleaning if the manual says to do so. Turn off the water before disconnecting it, then reinstall the mesh filter and seal; check for leaks. See cleaning inlet mesh filters.

If water enters but drains away at the same time, check the height and positioning against the installation diagram. Do not automatically assume this behaviour means a faulty valve.

After correcting anything accessible, follow the control panel's recovery procedure. If E02 returns when the water supply is normal, request a diagnosis and provide the model number and these observations separately.

A fill code describes a condition; it does not, by itself, identify the responsible component.

View all articles in Candy washing machine error codes and alerts