Candy identifies E02 as a water inlet problem in compatible washing machines. Check whether the machine does not fill, fills only a little, or loses water while trying to fill.
Check the water supply and hose
The official Candy technical FAQ directs E02 to the water inlet circuit. Check that the tap is open and that the household water supply is working. Check whether the hose is bent, crushed or damaged, without pulling on the appliance.
If the flow is low, check the conditions in the model’s manual. Do not use a pressure value from another platform or try to adjust internal inlet components.
Filters and water loss
An accessible mesh filter may need cleaning if the manual specifies this. Turn off the water before disconnecting it, then reinstall the mesh filter and seal; check for leaks. See cleaning inlet mesh filters.
If water enters but drains out at the same time, check the height and positioning against the installation diagram. Do not automatically assume this behaviour means a faulty valve.
After correcting anything accessible, follow the control panel’s recovery procedure. If E02 returns despite a normal water supply, request a diagnosis and provide the model number and these separate observations.
A filling code describes a condition; on its own, it does not identify the component responsible.
View all articles in Candy washing machine error codes and alerts
