F8 E1, F08 E01 and Lo FL identify a water supply issue on the documented Brastemp BNF15 front-load washer. Read the complete sequence and allow automatic recovery to finish before trying to clear the alert.
The aliases appear in the BNF15ASANA manual. For the BNF15ASANA, the manual describes an eight-minute drain with the door locked, which must finish before clearing the alert. Don’t mistake this for an instruction to open the door or unplug the machine immediately.
Check the water supply for this model range
The cited manual requires the specified hot and cold water connections. Check that the taps are turned on, the hoses aren’t kinked, and the installation matches the appliance diagram. This requirement doesn’t apply to another Brastemp model designed differently.
Cleaning the mesh filters or working on the connections must follow the user manual, with the water turned off and the power isolated where required. Don’t remove safety devices to increase the flow rate.
Allow the recovery routine described for the model to finish before following the clearing sequence. If the alert returns, contact support. The water supply requirements can help you check the installation context without attributing the code directly to the valve.
Keep F8 and E1, or Lo and FL, together when reporting the fault; the first part alone doesn’t identify this alert.
