Brastemp washer codes and alerts

Brastemp washer codes and alerts

Brastemp alerts in this range are based on the BNF15 front-load platform. Record the complete groups that alternate on the display and confirm the model before applying their meanings.

Code reference and display format

The official BNF15ASANA manual documents displays that alternate groups such as F8 and E1. Both parts form one code; F8 on its own does not retain the necessary information. A top-load Brastemp with indicator lights requires a different table.

Verified codes

F8 E1 or Lo FL refers to the water supply; F9 E1 to draining; F5 E2 to the door lock; Sd or SUD to excess suds. Keep any zeros in the documented group; do not treat every F5 or F9 as equivalent.

rL during cleaning

In this range, rL appears when a load is detected in the drum during the cleaning cycle. Wait until it is safe to open the washer, remove the items and follow the maintenance-cycle restart procedure described in the manual. This is an operating condition and does not indicate a motor fault.

For other messages, photograph the sequence and consult the exact manual. The business relationship with Whirlpool or Consul does not mean their tables apply; a Brastemp washer-dryer is not covered by this front-load model either.

Frequently Asked Questions

Do two alternating groups make up one code?

In the BNF15 manual, some alerts are shown as two alternating groups that must be recorded together. For example, F8 and E1 make up F8 E1; they are not two separate faults.

Can I use a front-load code table for a top-load Brastemp?

No. The design and controls may differ. Identify the model of the top-loader and use its manual, including the indicator-light patterns where applicable.

Does an alert during cleaning always require a repair?

No. In the documented range, rL indicates that clothing has been detected during cleaning and should be removed according to the procedure. If the alert continues with the drum empty or another code appears, consult the relevant instructions.

If the code has not been confirmed for your model, keep a record of the sequence before looking for a part or a reset combination.