F8 E1 or Lo FL error on a Brastemp front-load washer

F8 E1, F08 E01 and Lo FL indicate a water-supply issue on the documented Brastemp BNF15 front-load washer. Read the complete sequence and allow the automatic recovery to finish before trying to clear the alert.

The aliases appear in the BNF15ASANA manual. For the BNF15ASANA, the manual describes an eight-minute drain cycle with the door locked; this must finish before you clear the alert. Do not mistake it for an instruction to open the door or unplug the washer immediately.

Check the water supply for this model family

The cited manual requires the specified hot and cold water connections. Check that the taps are open, the hoses are not kinked and the installation matches the washer's diagram. This requirement does not apply to another Brastemp model designed differently.

Cleaning the mesh filters or working on the connections must be done in accordance with the user manual, with the water turned off and the power isolated where applicable. Do not remove protective devices to increase the flow rate.

Allow the recovery routine described for the model to finish before following the clearing sequence. If the alert returns, request assistance. The water-supply requirements can help you check the installation context without attributing the code directly to the valve.

Keep F8 and E1, or Lo and FL, together when reporting the fault; the first part alone does not identify this alert.

View all articles in Brastemp washing machine codes and alerts