Error E1 on AQUA washing machines: not receiving water

E1 indicates a water supply issue in the Japanese AQUA washing machine sections consulted. Check your model number before using that code for an AQUA machine in another market.

This association appears in the official AQUA FAQ. Start by checking the water that should be reaching the washing machine.

Check the water supply and inlet

Check the appliance's tap and whether there has been a water supply interruption. Check that the hose is not kinked. If the surrounding area has been exposed to freezing temperatures, consult your model's instructions; do not force a frozen hose or apply concentrated heat.

Whether you can clean the inlet mesh depends on the manual. Before disconnecting a permitted connection, turn off the water and disconnect the power supply. Refit the mesh and check for leaks as instructed; permanently removing it is not a solution to low water flow.

If E1 returns despite a correct external water supply, note whether no water enters or the filling is slow, and request assistance. The code alone does not prove that a valve or sensor is faulty.

Specify whether you use mains water or a different installation; its conditions should be checked against what the manual allows.

View all articles in AQUA washing machine error codes and alerts