In the AQUA washing machine sections consulted, E1 indicates a lack of water supply. Check your model number before using this code for an AQUA machine in another market.
This association appears in the official AQUA FAQ. Start by checking that water is reaching the washing machine.
Check the water supply and inlet
Check the washing machine's tap and whether the water supply was interrupted. Inspect the hose to see if it is kinked. If the surrounding area has been exposed to freezing temperatures, follow the procedure for your model; do not force a frozen pipe or apply concentrated heat.
Whether you can clean the inlet mesh depends on the manual. Before dismantling any connection that the manual permits, turn off the water and disconnect the power supply. Refit the mesh and check for leaks as instructed; leaving it out permanently is not a solution to low water flow.
If E1 returns despite a proper external water supply, note whether no water enters or the filling is slow, and contact support. The code alone does not prove that a valve or sensor is faulty.
Mention whether you use a mains water supply or a different setup; check that its conditions meet the requirements in the manual.
View all articles in AQUA washing machine error codes and alerts
