E2 error in AQUA washing machines: water not draining

E2 refers to a drainage failure on the documented AQUA models. The correct drainage setup depends on the type of machine; don’t use a height that’s assumed to suit all washing machines.

The AQUA FAQ in Japanese includes checks for the hose and drain outlet. Confirm the machine’s design before changing the setup.

What you can check from the outside

With the washing machine stopped, check whether the hose is kinked, raised higher than the manual allows, or inserted in a way that blocks its end. Also check for any visible blockage in the household drain.

A gravity-fed outlet and a pump outlet aren’t necessarily set up the same way. Don’t copy the setup for a front-loader or tilt the machine to drain the water. Don’t open a filter unless your model’s manual describes its presence or how to access it.

Trapped water can prevent the machine from moving on to the spin cycle. If the external restriction doesn’t explain E2, arrange an inspection rather than assuming it’s a spin motor problem. Check the separate information for E1 water supply and U3 spin errors if either of those messages is displayed.

Note where the hose ends and whether the water drained; this will help with checking the drainage setup.

View all articles in AQUA washing machine error codes and alerts