
To deal with a bad odour from the washing machine, find out where and when it occurs. Damp residue may need cleaning, while a sewage or burning smell points to other possible causes.
Start with when and where it occurs
Observe without leaning in to sniff inside: does it occur when you open the machine after several days, when water drains, during heating, or continuously in the room? Check whether it is concentrated around the opening, detergent drawer or drain connection. Do not try to identify a microorganism based on the smell.
| What you notice | What to check | Next step |
|---|---|---|
| Dampness and visible deposits | Seal, detergent drawer and accessible washing area | Remove residue and clean with a compatible method |
| Smell associated with water remaining in the machine | Whether draining finishes and where water remains | Address water retention before repeating cleaning |
| Sewage smell, especially while draining | Connection to the pipe, trap and other drains | Check the installation |
| Electrical or burning smell, or smoke | Do not run any more tests | Stop using the machine and follow the troubleshooting steps |
Inspect accessible parts of the machine
If there are no signs of danger, empty the machine and, with the power supply isolated before doing any manual work, check the areas described in the manual. Examine the folds of the seal, detergent drawer and drum. Open the pump filter only if you are authorised to access it and have dealt with any retained water.
For widespread contamination, see mould and slimy deposits. If you see material flaking off, follow the flakes and soap residue steps. Disinfection requires a verified purpose and method; it is not the automatic solution to every smell.
When the cause is outside the machine or you need to stop
A smell coming from the pipe may require checking the drain connection. If it shares an outlet with another appliance, check the conditions of that shared connection. Do not pour drain cleaner into the washing machine to deal with an odour from the plumbing.
If there is a burning smell or smoke, see what to do about an electrical smell. Do not run an empty cycle to see if the smell goes away. A new smell from a product does not mean the machine is safe either: identify whether it started after applying a product or after heating.
After cleaning
Allow the stated rinse and drying steps to finish, then check whether the smell returns before washing or only with a load. If it soon returns despite the visible areas being clean, note the circumstances and arrange an inspection of the circuit or installation. If the machine does not smell but the clothes are affected, follow the guide to odours in clothes.
Frequently Asked Questions
Can a washing machine that is clean on the outside smell from the drum?
Yes. A clean outer casing tells you nothing about the condition of the drum, detergent drawer or drainage route. Check the source of the smell within the scope of authorised access.
Can the smell tell you whether there is mould?
No. A musty smell can accompany different types of build-up; it does not identify species or confirm contamination throughout the machine. An inspection can guide cleaning, but it is not a substitute for testing.
Should there be a product smell after cleaning?
Do not use fragrance as a test of whether the machine is clean. Follow the rinse instructions on the label and in the manual. If a strong or irritating smell persists, do not add another product or put clothes in until you have worked out what remains.
Could the smell come from the drain even if the machine is clean?
Yes. The smell may come from the connection or the drainage system. If it occurs while draining or is also present at other outlets, check the installation rather than repeating drum treatments.
Do not mask the smell with perfume: you could lose a useful clue about whether the cause is still present.




