
Address a bad odour from the washing machine by identifying where and when it occurs. Damp residue may call for cleaning, while a sewer or burning smell points to other causes.
Start with when and where it occurs
Observe without leaning in to smell the inside: does it occur when you open the machine after several days, while it drains, during heating, or continually in the room? Check whether it is concentrated around the opening, dispenser or drain connection. Don’t identify a microorganism based on a description of the smell.
| What you notice | What to check | Next step |
|---|---|---|
| Dampness and visible deposits | Gasket, dispenser and accessible washing area | Remove residue and clean with compatible products |
| Smell associated with water that remains | Whether draining finishes and where water remains | Address water retention before doing repeated cleaning |
| Sewer smell, especially while draining | Connection to pipes, the trap and other drains | Check the plumbing |
| Electrical, burning smell or smoke | Without running any more tests | Stop using the machine and follow the troubleshooting steps |
Inspect accessible areas of the machine
If there are no signs of danger, empty the machine and, with the power disconnected for any manual tasks, check the areas described in the manual. Examine the folds of the gasket, the dispenser and the drum. Only open the pump filter if access is authorized and any retained water has been dealt with.
For widespread contamination, see mould and slimy deposits. If you see material flaking off, follow the flakes and soap residue instructions. Disinfection requires a verified purpose and method; it is not the automatic solution to every odour.
When the cause is external or you need to stop
A smell coming from the pipe may require checking the drain connection. If it shares an outlet with another appliance, check the conditions of that shared connection. Don’t pour drain cleaner into the washing machine to deal with an odour from the plumbing.
If there is a burning smell or smoke, see what to do about an electrical smell. Don’t run an empty cycle to see if the smell goes away. A new product smell doesn’t mean the machine is safe either: determine whether it started after applying a product or after heating.
After cleaning
Let the rinse and drying steps finish as directed, then observe whether the smell returns before washing or only with a load. If it comes back quickly while the visible areas are clean, note the circumstances and arrange an inspection of the circuit or plumbing. If the machine doesn’t smell and only the clothing is affected, follow the clothing odour troubleshooting steps.
Frequently Asked Questions
Can a washing machine that’s clean on the outside smell from the drum?
Yes. A clean exterior doesn’t tell you the condition of the drum, dispenser or drainage path. Check the source of the smell within the scope of authorized access.
Can the smell tell me if there’s mould?
No. A musty smell can accompany different types of build-up; it doesn’t identify species or confirm contamination throughout the machine. Inspection can guide cleaning, but it doesn’t replace testing.
Should there still be a product smell after cleaning?
Don’t use fragrance as proof that the machine is clean. Follow the rinsing directions on the label and in the manual. If a strong or irritating smell persists, don’t add another product or load laundry until you’ve determined what remains.
Can the smell come from the drain even if the machine is clean?
Yes. The smell may come from the connection or drainage system. If it occurs while draining or at other fixtures too, check the plumbing instead of repeating drum treatments.
Don’t mask the smell with perfume: you could lose a useful clue about whether the cause is still present.




